This is the MazeRoll
File comment: MazeRoll cylindrical maze puzzle
MazeRoll Shapeways1.JPG [ 140.8 KiB | Viewed 1682 times ]
I hope you like this as a design and as a puzzle.
It’s a fake-twisty puzzle
, because it can rotate around one axis but cannot scramble.
File comment: MazeRoll dimensioned
MAZEROLL_dimensioned.jpg [ 162.07 KiB | Viewed 1682 times ]
Size (assembled): approx. round 45 mm x 141 mm
Weight: approx. 90 gramsYoutube video of puzzle Youtube video of assembly
The aim of the puzzle is to bring the ball through the maze from one end of the cylinder to the other end.
Added to this challenge is the situation that this maze is a kind of maze within a maze. This makes solving it much more complex (hence more fun) than "align the rings and follow the path". The rotation of adjacent rings is restricted by a simple groove-and-notch system, especially designed to prevent you from positioning the rings such that the maze can be navigated at once. In other words, you are forced to reposition the rings several times while the ball is somewhere in the maze. This makes solving take longer than you would expect at first sight!
Also, this is not 1 puzzle; the cylindrical disk parts can be arranged in several combinations to create an easy or more difficult puzzle. (So, you get more puzzles for the price of one. But the solving method of all combinations is comparable)
This may be the puzzle that can also be appreciated by your not-so-into-puzzles friends and relatives, that like to see puzzles but fear to try them out. This puzzle you can start at an easy level, and continue to the more difficult challenges. Please be informed that the difficulty indicated is for ‘the general public’. For experienced puzzlers I’d rate the most difficult challenge as ‘moderate’.
Find the overview of configurations here
If you like, you can also dye the puzzle e.g. to have it look like pop-art
File comment: MazeRoll as pop-art
MazeRoll pop-art.JPG [ 1.08 MiB | Viewed 1682 times ]
If you’re experienced in the assembly of Shapeways puzzles, you’ll find that it’s not too difficult to create the MazeRoll from the kit at Shapeways.
The MazeRoll is available at my Shapeways shop
and ready assembled at my wife’s webshop
The MazeRoll is a registered design (reg.no. 002144584-0001).