Nice to see somebody remade the terasnake, was that by twisting or disassembling? How long did it take you?

Beautiful snake-variant.

Could you upload anther image from the Spiral Teraminx with other colors at the front?
(for example like the spiral megaminx on my avatar)

Oliver, here the pictures you ask for:

Greg's MasterSkewb Minx (extensions only for a mp MS)

3x3x3 cube in a bottle (bottleneck 40mm, cube FF)

Non Twisty IPP Puzzle

Greg's 3x4x6 FF cuboid

MasterSkewb ball in the color of theDuoMasterball (extensions only for a mp MS)

The Master Skewb Minx (why not Master Skewb Ultimate?) would make a good candidate for my first Shapeways purchase, if you were to make it available.

Nice! I have a set of spiral stickers from Oliver for the MF8 Gigaminx but this takes it to another level!

Edit: I find the tumbling / assembling / stickering of twisty puzzles to take nearly 100% of my free time. Yet, you are at least 3x more prolific. You must be an assembly / stickering machine

I'm glad they turned out to fit. I tend be worries when the measurements don't come from me ^^

I like your+Greg 3x4x6 proportional.
how are cubies size? it will great if you make review on it?Thanks

Can I have some images of this one? Were you the builder?Indeed. Why not the original name?
http://twistypuzzles.com/cgi-bin/puzzle.cgi?pkey=1907

This puzzle REALLY needs to be mass produced...

Cupper Bump Pyramide (Claus No.1)

Hex Block (Claus No. 2)

4x4x4 Sticker Mod (Rubik's Tangle - hard to solve)

Eric's Master Starminx

3x3x3 Burger

David's Star Of David

David's RotoCrystal

Where do you get the 3x3 burger, Claus?

Because I got some question for the 3x3 burger:


I found it last Saturday on the GCD by a dealer from the Netherlands. It is looking like a mass produced one.

Hrrm.
I looked again into the photos I made during the GCD and reckognized:

I didn't made phtotos of your pyramid and the HexBlock.
I didn't photograph the others as well but I already have images of them.

Can you upload some images?

Andreas

Where on earth did you find Tangle stickers for the 4x4x4? Can you see all of the detail in the stickers?

Andreas, there will come up a threat today with all informations you need.

Darren: If you are looking for stickers, ask the Master of Stickers, Oliver.

If you can't find it in his shop, contact him directly. There exist no stickers set on earth, he is unable to deliver.

Greg's Black 5x5x9 cuboid (the second time in black)
Greg's Black 6x7x7 cuboid (the second time in black)
Quatro Fused 3x3x3 (never seen before, mass produced)
3x3x3 Companion (Oliver's sticker mod)
SmaZ's Time Machine (not rare, but beautiful
Luke's Hexoid (first design by Luke)

Look here:
http://twistypuzzles.com/cgi-bin/puzzle.cgi?pkey=1582

The year of production was left open intentionally because this is one of the oldest modifications of a 3x3x3. I found some hints that is was made somewhere before 1990 but nothing more precise.

Andreas

Video: http://www.youtube.com/watch?v=2MPgud7dMr0

Very cool!

The Great Icosahedron is indeed a first-time-shape.
Why did you made it with a 2x2x2 as core? A megaminx or a skewb would have lead to a non-shape-changing puzzle?
Why has the Triakis tetrahedron an orange body?
PLEASE post images of #8 and #9 with stickers on it.

Andreas

Andreas, you are the only person who has interests in this shapes.

I use the 2x2x2 core only for validation of the shapes. I am a newbie in CAD and check with this the correct cuts and angles of the mathematical solids.

To transform the core into a Skewb or Rex or 3x3x3 will take less than 10 minutes. It is only one scaling (12.15 up to 28.5) process and 4 new cuts.

I am testing the possibility of color printing with this solids. You will see a lot of more in a lot of special colors in the next weeks. I don't sticker them.

Does anybody want to prove him wrong?

I love the shape of the orange one. I also collect dice and I know the triakis tetrahedron is a fair dice shape. Here as its applied to a 2x2x2 I like how this could be stickered with 6 colors and look like a normal 2x2x2 with a raised ridge through the center of each face. Or you could sticker this with 4 colors and have a Pyramorphix with a peak in the center of each face. And I even like the orange color. The puzzle collector in me (which tries to keep me from going broke) tells me this is just a 2x2x2 and nothing new. But I'm just as big a fan of geometry and I, like clauswe, would be tempted to leave this unstickered and just play with it to see all the interesting shapes I could turn it into. I even like the texture the printing process has left on the surface of that one. I'm pretty sure that wasn't printed on Shapeways. Clauswe, do you have your own 3D printer? What type of material are these printed in?

Carl

Video: http://www.youtube.com/watch?v=EBOOf5284HM

And once again:
The puzzles which are really interesting (because I do not own them) are the ones you haven't stickered.
Claus, you are unfair!

Why designed you the tips for the medial RT so long? Why not the "traditional" length?

The length of the tips for a medial rhombic triacontahedron is more than "traditional", they are defined specifically by the way the planes of a triacontahedron intersect when stellated. This means that if the tips are a different length, it is not a medial rhombic triacontahedron, it is a different shape entirely. (perhaps that is why you put it in quotes, I'm not sure)

It looks much closer to a Medial Triambic Icosahedron instead (a stellation of the icosahedron), but I can't tell for sure from this picture alone if the angles are accurate for that either.

Indeed. That was what I intended to say.
Please look again into the table Claus posted. He named his creation "Long tips on a medial rhombic Triacontahedron".

@Claus: Why this length?

I made a mistake by cutting the cube into a Medial Rhombic, two wrong cutting point. The result was this. The lenght of the tips are the same as the tips on a dedecahedron.

This is the reason to make only 3d-print masters for a mini 2x2. This is a cheap way to check the design.

This is definitely a favorite topic for me.

Today I show all the Master Skewb mods, Greg has designed for me.

The icosahedron and the sphere are both missing in the museum so far.
I assume, Greg designed them all in this year?

BTW: You are missing the Rhombi triacontahedron.

Why have to colored the nova block like this?
The different colors make it impossible to solve because I can't tell the "solved" position.

I actually like the looks of it as is. It's solved when its in the shape of a Nonagon Prism. Think if its as a Golden Cube where the color doesn't have anything to do with the solving. Which makes me think of an interesting experiment. Say you have a group of people that can solve the Golden Cube. Give each one of them a scrampled Golden Cube where each piece is covered with golden stickers. Also give them one where each piece of the Golden Cube is molded in a different colored plastic. Which would be easier to solve? And why? I'm guessing the different colors could prove a big enough distraction that it would appear noticably harder.

Carl

I like those master skewb transformations alot! I tried designing the icosahedron a while back but I couldnt really find a suiting size/ cut proportionality to make it. Some areas were too small to sticker.

When will these add-ons be available for purchase? I would like to buy all of them! probably also the tetra.

Stupid me.

Which try is this for the Octahinx?

Anyway: They look good as always.

Traiphum's 7x7 morphix

Gus's (AJ's) Camouflage Cube

Greg's (Jason's) Face Turning Icosahedron (Circo-Radiolarian aka Radiolarian II)

Hungab's Super square-1 Octahedron

Please Claus, I beg you put all of the extension puzzles for sale!

Very good. Once again.
I like the first stellation of icosahedron very much because it optimizes a gap already filled.
Up to today I used Tony's Nesting Cubes as representative for this solid although it does not perfectly match.
I can't wait to see the result.
I assume your Medial RT is massive . Otherwise its weight wouldn't be that high, right?

Aaah!I will hate you if you forget this.

Funnily I wrote the description for the truncated Triakis Tetrahedron some minutes ago. The means I reread your sentence "I need it for a combined image". I wondered which combination this mgith be. Thank you for giving me the answer.

Very impressive as always.

Can you post an in-midturn-image of the Soccerminx?

Why have you remodelled the Kiteminx?
http://twistypuzzles.com/cgi-bin/puzzle.cgi?pkey=1611