Hello all, few days ago I started these two puzzles, and today I finished the first,
This puzzle is part of the serie "pioneer 11" I have created (5x5, 2x2, FC);
I hope you like.
Best regards
Rafael

1- Puzzle was cut and coated, 2 pieces need an extension;
2- creating extension step 1;
3- creating extension step 2 & 3 (step 3 on the left adding plastic in the hole of extension);
4- refinement of the pieces;
5/6- creation and polishing of the radius, assembly and final polishing (body complete).

next days V-2 HD extended version & 2x3x3 Fisher + sticker variant

1- cut desing, cut guides, cut & bonding extensions (no photos available);
2- glueing 1mm thick polistyrene sheet;
3- cleaning the surfaces for bonding the second layer of plastic;
4- crude product is completed;
5- cleaning & improving shape of pieces;
6- creation of the radius of the edges;
7- polishing of the pieces;
8- Body completed;
P.S. 9- final polish complete.

10- extending all pieces of cube with 3mm thick black polistyrene (used to no damage the mechanism of assembly) on going;
11/12- comparison between a 3x3x3 guhong and extended v-2/particular;
13/14- showing cut and highlighting of the coupling mechanism;
15-coating completed;
16- Body completed;
17- final polish complete.

19-warnings, avoid using a v-cube 2 for your puzzle modifications is very difficult achieve excellent results like me
next & last update in the puzzle building & modding fisher square pyramid;
soon (only new puzzles & marcketplace post) Fisher 3x3x4 & Fisher super floppy cube;
Best regards

sticker it already!!! nice looking puzzle.

Hello Hex, puzzle,was stickered and shown here:
viewtopic.php?f=15&t=23388
best regards
rafael

Hello all, today i will shot a video of this object and add an old puzzle i would have ended long ago, 2x3x3 Fisher + 1 or 2 photos regarding the v-2 HD.
Best regards
rafael

Hello,
i have ultimate the last puzzle of this post
i uploaded 2 new photos of the body
Best regards
Rafael