Online since 2002. Over 3300 puzzles, 2600 worldwide members, and 270,000 messages.

TwistyPuzzles.com Forum
 It is currently Fri Jul 25, 2014 4:25 am

 All times are UTC - 5 hours

 Page 1 of 1 [ 15 posts ]
 Print view Previous topic | Next topic
Author Message
 Post subject: I need help with the 2x2x4Posted: Wed Jul 27, 2011 10:47 pm

Joined: Wed Jun 22, 2011 4:57 pm
Location: The land of dreams, coincedentally located in Alberta
It arrived in the mail today and it's a snazzy puzzle, but I'm stuck with it. I can solve every regular cube from 2x2x2 to 5x5x5, so I'm pretty sure I just need to know the steps and apply knowledge accordingly. I can already complete the two ends of the puzzle, but this leaves the middle, and when I try using standard 2x2x2 sequences to solve that part it messes up the caps, so am I just doing it wrong?

Again, I don't need a really detailed guide, just some basic steps. Help would be appreciated

_________________
3x3x3 PB: 38.9 seconds
Well, I accumulated puzzles without even trying this Christmas. Whoops.
(Bermuda 8 planets, Rex Cube, Master Skewb, London Natural History Museum keychain 2x2x2, Impossiball)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Thu Jul 28, 2011 2:21 am

Joined: Sun Jun 13, 2010 1:00 am
What I do is match up the extensions with their base first. (what's that word You know making a 7x7x7 a 3x3x3?). After that it can be solved like a normal 2x2x2.

_________________
My Shapeways Shop
My Museum Puzzles

Top

 Post subject: Re: I need help with the 2x2x4Posted: Thu Jul 28, 2011 2:43 am

Joined: Tue Feb 08, 2011 3:17 am
Location: Australia
Reducing.

If outside in doesn't work.. try inside out .

PS Are you aware that it shape shifts? (just checking).

_________________
1st 3x3 solve Oct 2010 (Even though I lived through the 80s).
PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked).
1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Thu Jul 28, 2011 3:12 am

Joined: Sun Jun 13, 2010 1:00 am
Burgo wrote:
Reducing.

If outside in doesn't work.. try inside out .

PS Are you aware that it shape shifts? (just checking).

Thanks

Apart from the actual pieces, solving inside out and outside in are identical. Both are solving a 2x2x2 and then solving a second 2x2x2 without mixing up the first one. I would "try" solving it that way but I figured out by reducing it to a 2x2x2 it is a lot faster and super simple.

_________________
My Shapeways Shop
My Museum Puzzles

Top

 Post subject: Re: I need help with the 2x2x4Posted: Thu Jul 28, 2011 11:39 am

Joined: Wed Jun 22, 2011 4:57 pm
Location: The land of dreams, coincedentally located in Alberta
Burgo wrote:
Reducing.

If outside in doesn't work.. try inside out .

PS Are you aware that it shape shifts? (just checking).

Yes. Would using the edge-pairing algorithms from the 4x4x4 help? I know a really good edge-pairing alg that should work on any size cube (as long as you adjust the deepness of the first and last turns). It swaps two pieces like so (danger: bad ASCII art ahead):
OOOO
XOOO
OOOX
OOOO
On the 4x4x4, it swaps the two Xs. Yeah, I was too lazy to make a proper image

_________________
3x3x3 PB: 38.9 seconds
Well, I accumulated puzzles without even trying this Christmas. Whoops.
(Bermuda 8 planets, Rex Cube, Master Skewb, London Natural History Museum keychain 2x2x2, Impossiball)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Thu Jul 28, 2011 9:30 pm

Joined: Sat Mar 29, 2008 12:55 am
Location: WA, USA
actually, the 2x2x4 is not equivalent to solving a 2x2 then another 2x2, but solving a 2x2 then domino corners, or the top and bottom layer on a 2x2x3.
Yes, you can use the algorithms that you use to flip an edge pair or to swap 2 edges (edge parities) on a 4x4x4 or 5x5x5 cube to flip a corner pair or swap 2 corners on a 2x2x3, 2x2x4, or a domino.

Hope that helps.

Elijah

_________________
"This is Pretty off-topic"

"You are actually more off topic than me, you mentioned something on topic in the Off Topic forum."

"You more so for discussing the on-topic "off-topic" topic in the off-topic forum."

Top

 Post subject: Re: I need help with the 2x2x4Posted: Fri Jul 29, 2011 12:03 pm

Joined: Wed Jun 22, 2011 4:57 pm
Location: The land of dreams, coincedentally located in Alberta
I managed to solve it using the Japanese directions (possibly the first time Japanese directions have helped?) and I also thank you guys in this thread for helping me.

So it turns out there's an algorithm to swap two of the cap-pieces without shape-shifting the puzzle, so I solved the middle like a 2x2x2 and used that algorithm to finish the caps (after I made one cap blue and the other white, of course.)

I'll make a shoddy picture and write the algorithm here for those people trawling Google and seeking solutions:

_________________
3x3x3 PB: 38.9 seconds
Well, I accumulated puzzles without even trying this Christmas. Whoops.
(Bermuda 8 planets, Rex Cube, Master Skewb, London Natural History Museum keychain 2x2x2, Impossiball)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sat Jul 30, 2011 1:40 am

Joined: Tue Feb 08, 2011 3:17 am
Location: Australia
Gooday GoombaGeek,

That algo just scrabled my cube.. you might like to check it?
I would use (R2 U R2 U' R2) U' D (R2 U' R2 U R2) D' to achieve that (it swaps the RHS top).

Cheers,
Burgo.

_________________
1st 3x3 solve Oct 2010 (Even though I lived through the 80s).
PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked).
1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sat Jul 30, 2011 12:01 pm

Joined: Wed Jun 22, 2011 4:57 pm
Location: The land of dreams, coincedentally located in Alberta
Burgo wrote:
Gooday GoombaGeek,

That algo just scrabled my cube.. you might like to check it?
I would use (R2 U R2 U' R2) U' D (R2 U' R2 U R2) D' to achieve that (it swaps the RHS top).

Cheers,
Burgo.

I may have messed it up by simplifying a turn (you were told to turn the top 3 layers, I translated that to "turn the bottom layer the other way", I may have screwed up the direction of that turn. If you kept your instructions, then check the last step: that's the algorithm I used.

_________________
3x3x3 PB: 38.9 seconds
Well, I accumulated puzzles without even trying this Christmas. Whoops.
(Bermuda 8 planets, Rex Cube, Master Skewb, London Natural History Museum keychain 2x2x2, Impossiball)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 5:42 am

Joined: Thu Jan 20, 2011 6:05 pm
Location: Netherlands
I have one too, but not yet scrambled it.
If you start shapeshifting the puzzle and then restore it to a tower (but not how it was before shapeshifting), can you then always still solve it with the 2x2 and domino algorithms, or are some extra algorithms needed?

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 3:44 pm

Joined: Thu Oct 16, 2008 9:46 pm
Location: Littleton CO
Scrambling it by shapeshifting is just like scrambling a normal 2x2. You can do all the same moves and everything like normal.

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 5:28 pm

Joined: Thu Dec 31, 2009 8:54 pm
Location: Bay Area, California
GoombaGeek wrote:
Burgo wrote:
Gooday GoombaGeek,

That algo just scrabled my cube.. you might like to check it?
I would use (R2 U R2 U' R2) U' D (R2 U' R2 U R2) D' to achieve that (it swaps the RHS top).

Cheers,
Burgo.

I may have messed it up by simplifying a turn (you were told to turn the top 3 layers, I translated that to "turn the bottom layer the other way", I may have screwed up the direction of that turn. If you kept your instructions, then check the last step: that's the algorithm I used.

I correct for the odd-parity first by turning U and then I just do a three-cycle of the three broken corners with a [3,1] commutator (needs a setup).

U, [F'2, [[U', L'2, U], R'2, [U', L'2, U], R'2], F'2]

This is [1] [1:[[1:1],1]] for 11 moves total. I haven't proven it but I'm pretty sure this is the shortest possible sequence. If there is no [3,1] commutator sequence that cycles 3 corners in the same face (which I don't think there is) then it is the shortest sequence.

_________________
Prior to using my real name I posted under the account named bmenrigh.

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 9:02 pm

Joined: Wed Jun 22, 2011 4:57 pm
Location: The land of dreams, coincedentally located in Alberta
I've never figured out what the square brackets in algorithms refer to

Do I just do all the moves in normal order, or do I have to repeat them in some way?

Anyway, I'm pretty sure that solving by shapeshifting will let you do the center pieces, but the caps need special treatment - either you use an algorithm or keep doing non-shapeshifting turns (R2, move the caps how you want, R2 again).

_________________
3x3x3 PB: 38.9 seconds
Well, I accumulated puzzles without even trying this Christmas. Whoops.
(Bermuda 8 planets, Rex Cube, Master Skewb, London Natural History Museum keychain 2x2x2, Impossiball)

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 10:17 pm

Joined: Sun Jun 13, 2010 1:00 am
I wonder which method is better, my reduction way or solving the 2x2x2 then outside. I take about 25 twists then a 2x2x2 solve to solve it with my method. How long does it take using yours? (just solve it like normal and count the rotations)

_________________
My Shapeways Shop
My Museum Puzzles

Top

 Post subject: Re: I need help with the 2x2x4Posted: Sun Jul 31, 2011 11:11 pm

Joined: Thu Dec 31, 2009 8:54 pm
Location: Bay Area, California
GoombaGeek wrote:
I've never figured out what the square brackets in algorithms refer to

Do I just do all the moves in normal order, or do I have to repeat them in some way?

U, [F'2, [[U', L'2, U], R'2, [U', L'2, U], R'2], F'2]

The [] are just grouping and don't actually have any meaning.

When I write [1,1] I mean there is an X part of length 1 and a Y part of length 1 and they are put together like X Y X' Y'. So [1,1] is a 4 move commutator.

[1:1] is a conjugate so it is X Y X'.

Nesting works too:
[[1:1],1] -> [[A:B],C] -> A B A' C A B' A' C'

To me the most important thing about sharing "algorithms" is not the full sequence of moves laid out in order but rather the parts of the sequence and how they are put together to make the whole routine. I'm not a big fan of posting a 11-move sequence without saying how it was made.

_________________
Prior to using my real name I posted under the account named bmenrigh.

Top

 Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending
 Page 1 of 1 [ 15 posts ]

 All times are UTC - 5 hours

#### Who is online

Users browsing this forum: No registered users and 10 guests

 You cannot post new topics in this forumYou cannot reply to topics in this forumYou cannot edit your posts in this forumYou cannot delete your posts in this forumYou cannot post attachments in this forum

Search for:
 Jump to:  Select a forum ------------------ Announcements General Puzzle Topics New Puzzles Puzzle Building and Modding Puzzle Collecting Solving Puzzles Marketplace Non-Twisty Puzzles Site Comments, Suggestions & Questions Content Moderators Off Topic