View unanswered posts  View active topics

Page 1 of 1

[ 27 posts ] 

Author 
Message 
cubeguy314

Post subject: Rex cube solution Posted: Sat Oct 23, 2010 3:27 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Hi guys! I have tried every solution I can think of to solve the rex cube but I still can't solve it. Please help.
_________________ ~cubeguy314~


Top 


Luke

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 3:42 pm 

Joined: Thu Sep 24, 2009 12:21 pm Location: Chichester, England

For the Rex Cube you can solve it like a Face Turning Octahedron. Solve the center pieces first (the corners of the FTO), then the petal like parts of the puzzle (the centers of the FTO), and then finally the edges.
_________________ 3x3x3 single: 5.73 seconds. 3x3x3 average of five: 8.92 seconds. 3x3x3 average of twelve: 9.77 seconds.
Buy the Curvy Copter Skewb, NovaMinx, and more here!


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 3:44 pm 

Joined: Sat Jun 26, 2010 12:06 pm

That's what I tried but then I encountered a problem with the edges
_________________ ~cubeguy314~


Top 


Monopoly

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 3:51 pm 

Joined: Sun May 17, 2009 1:33 pm Location: USA, North America, Planet Earth, Solar system, Milky Way galaxy, Universe

I have a good, working solution for the Rex cube, which involves edges=>centers(corners? the triangle pieces)=>face centers. It's based off of my FTO method (not the conventional corner=>center=>edge) which works fine for me. I was just going to make a walkthrough solve video, so I'll post it when I'm done (:
_________________ sj
NEW VIDEOS 3x3x3 stopmotion solve Meffert's new Pyraminx Crystal solve QJ 4x4x4 solve


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 3:55 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Could you just tell me a way to solve the edges once I have solved everything else, because the FTO solution you gave me long ago.
_________________ ~cubeguy314~


Top 


Monopoly

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 4:04 pm 

Joined: Sun May 17, 2009 1:33 pm Location: USA, North America, Planet Earth, Solar system, Milky Way galaxy, Universe

hmm....did I? Basically, you solve edges like a Dino cube. It's good to remember the color scheme, so you don't get parody later and have to resolve the whole thing. you then solve the trianglepieces, starting from one corner. It's hard to explain, I will show in the video. Then you solve the facecenters using a form of u r u' l' u r' u' l . Because most of my solutions use intuition more than algorithms, it's extremely hard to project to other people. I'll upload the video whenever I finish solving the Rex cube! xD
_________________ sj
NEW VIDEOS 3x3x3 stopmotion solve Meffert's new Pyraminx Crystal solve QJ 4x4x4 solve


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 4:35 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Don't worry, solving things intuitively is my thing, that's how I came up with my own Helicopter Cube solution
_________________ ~cubeguy314~


Top 


Monopoly

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 5:19 pm 

Joined: Sun May 17, 2009 1:33 pm Location: USA, North America, Planet Earth, Solar system, Milky Way galaxy, Universe


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Sat Oct 23, 2010 7:26 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Cuber's Log: 10/23/10 I encountered a state of parity while journeying through this treacherous puzzle. I don't know if I'll make it. If I can't get out of this state of parity I may have to journey back to the beginning and find a different route. Hopefully I'll find some way to get through. So close yet now so far...
_________________ ~cubeguy314~


Top 


Luke

Post subject: Re: Rex cube solution Posted: Sun Oct 24, 2010 4:18 am 

Joined: Thu Sep 24, 2009 12:21 pm Location: Chichester, England


Top 


roger

Post subject: Re: Rex cube solution Posted: Sun Oct 24, 2010 2:52 pm 

Joined: Tue Feb 16, 2010 1:50 pm

Here's my solution. It's fairly simple as it uses only a few different sequences. For this solution, I assigned the following letters to the corners: Attachment:
rex_cube_annotated_sm.jpg [ 56.27 KiB  Viewed 9248 times ]
The cube is oriented so that one corner is in front F: front top corner f: front bottom corner L: left top corner l: left bottom corner R: right top corner r: right bottom corner B: back top corner b: back bottom corner These are the relevant sequences:  Sequence S1: R L' R' L  Sequence S2: B R B' L' B R' B' L (this is basically S1 with turns on B between turns)  Sequence S3: B S2 B' (this is S2 with a turn on B before and after) Solution:Step 1: Solve Edges: like a Dino Cube (remember the color scheme your cube uses) Step 2: Solve Wedges: The easiest way is to pair up wedges into diagonals by swapping 2 wedges at the time, and then swap the diagonals around to the right faces.  Case 1: swap two wedges: S3 Attachment:
rex_cube_swap2wedges1_sm.jpg [ 40.99 KiB  Viewed 9248 times ]
 Case 2: swap two wedges: R' r' S3 r R Attachment:
rex_cube_swap2wedges2_sm.jpg [ 41.35 KiB  Viewed 9248 times ]
 Case 3: swap two wedges: rotate the the cube 90 degrees counter clock wise so that corner L ends up in front F and do: b' l' S3 l b Attachment:
rex_cube_swap2wedges3_sm.jpg [ 41.19 KiB  Viewed 9248 times ]
 To swap two diagonals use S1 Attachment:
rex_cube_swap3diagnonals_sm.jpg [ 40.78 KiB  Viewed 9248 times ]
Step 3: Solve Centers:  Use (S2)(S2) to swap the three centers on top, back left and back right faces Edit: Possible parity case:  if you end up with the entire cube solved except for 2 centers that are swapped, then the color scheme is incorrect. It's important to remember what color scheme your cube follows. The one in the picture (downloaded from the internet) I used to describe the solution uses a BOY color scheme. The cube I actually own uses BYO.
_________________ My Mods on Flickr


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Sun Oct 24, 2010 8:25 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Roger, great solution! Thanks a lot!
_________________ ~cubeguy314~


Top 


quickfur

Post subject: Re: Rex cube solution Posted: Thu Oct 28, 2010 10:12 am 

Joined: Wed Jan 14, 2009 6:37 pm Location: The Great White North

I have very recently discovered a sequence that permutes 3 wedges on the Rex Cube without touching anything else. Using roger's notation:
RLHL' R'LH'L
where R means turn R clockwise (if you're looking at R directly), R' means anticlockwise (again looking at R directly), same for L, and H is the diagonal middle slice that lies between L and B, r and f, and F touches its right side. H means push the middle slice up and left (IOW, clockwise if you're looking at R), and H' means push it down and right according to roger's picture (IOW anticlockwise if you're looking at R).
Armed with this sequence, you can solve the edges and face centers first (both of which are quite easy: just use 4twist commutators), and then fix the wedges independently.
Last edited by quickfur on Thu Oct 28, 2010 10:17 am, edited 1 time in total.


Top 


quickfur

Post subject: Re: Rex cube solution Posted: Thu Oct 28, 2010 10:15 am 

Joined: Wed Jan 14, 2009 6:37 pm Location: The Great White North

quickfur wrote: I have very recently discovered a sequence that permutes 3 wedges on the Rex Cube without touching anything else.[...] Note also, when using this sequence, that the wedges come in two independent sets: basically, wedges that lie on either diagonal on each face belong to two different orbits and cannot be intermixed. Within each orbit, wedges are always in an even permutation, so if you ever need to swap two wedges, realize that you need to actually cycle 3 wedges, the third of which is the same color as one of the other two.


Top 


cubeguy314

Post subject: Re: Rex cube solution Posted: Thu Oct 28, 2010 8:19 pm 

Joined: Sat Jun 26, 2010 12:06 pm

Memorized every algorithm!!
_________________ ~cubeguy314~


Top 


pytlivyj_1

Post subject: Rex cube solution Posted: Sun Dec 26, 2010 5:45 am 

Joined: Tue Mar 24, 2009 12:52 pm

My method of solving Rex Cube. Stage 1. Solving the edges. Let's designate turns of the top corners habitual to us by capital letters F, R, L, B, and turns of the bottom corners  appropriate small letters f, r, l, b. The turns of average layers parallel R and L,  as Ml (are closer to L) and Mr (closer to R). At performance of turns of these average layers we look at a cube at the left. The next edges Rex Cube at solving always correctly are guided rather friend from the friend. Therefore solve by their usual turns of corners. But it is necessary to remember, that the alternation of colours of sides Rex Cube always should be exact. To not be mistaken, the assembly is best for beginning with white  blue  red corner (on a cube from white plastic instead of a white side  black). The colours these should alternate clockwise. In figure of an edge around of this corner are designated in figures 1, 2, 3. If we shall disturb an exact arrangement of colours of sides Rex Cube, at the following stage it will be impossible to change by places 2 pieces of the centre.Stage 2. Solving centers.The centres are rearranged by 3cycles with the help of simple algorithms  3 pieces around of a corner or 3 pieces on "belt". Stage 3. Solving of "petals" 2 opposite sides. Visually we examine Rex Cube and we find that side, on which a lot of "petals" is already solve. This side is solved by first with the help of algorithms Alg 1 and Alg 2. Then we solve an opposite side Rex Cube  so more effectively and faster to solve Rex Cube. Sometimes at solving of these two sides before performance of algorithms and after them, we use intermediate turns. Stage 4. Solving of "petals" 4 lateral sides. Solving also is carried out with the help of algorithms Alg 1 and Alg 2, sometimes applying intermediate turns.* Return Alg  algorithm executed in the return order.
THE RESULT  Rex Cube fully solved!For the even greater efficiency and speed of solving Rex Cube, at performance of intermediate turns we try to rearrange "petals" so that on the places rose at once 2 or 3 pieces.


Top 


MikonJuice

Post subject: Re: Rex cube solution Posted: Sun Feb 27, 2011 12:23 am 

Joined: Tue Oct 19, 2010 5:16 pm

Can someone give me hints from the beginning? I can't even solve the edges and I have nowhere to practice the Dino Cube moves...cause I don't won one.


Top 


Ender Delphiki

Post subject: Re: Rex cube solution Posted: Sun Feb 27, 2011 12:30 am 

Joined: Wed Jan 28, 2009 7:55 pm Location: Montana

R' F R F' is a commutator which swaps the FL, FR, and RB edges. (when in doubt, resort to a commutation)
_________________
Andreas Nortmann wrote: Things like this are illegal. If not I will pass an appropriate law.


Top 


MikonJuice

Post subject: Re: Rex cube solution Posted: Sun Feb 27, 2011 6:55 pm 

Joined: Tue Oct 19, 2010 5:16 pm

Beautiful! Rentlix, after this one alg. I could actually solve the rest of the Rex Cube! I used your alg. and after that I proceeded with roger's really easy to understand method!
Really fun puzzle to solve!
Thanks a bunch!


Top 


Andrea

Post subject: Re: Rex cube solution Posted: Thu Jul 14, 2011 10:21 am 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

I solve my Rex Cube with only this R L' R' L algorithm. and variants. 2 wedges + 1 center = 1 ? ( I name it lens) Put 1 Lens Out and from other side in, so it flipped. R L' R' L f' L f L' flipps the "lens" in front side ( from center to right bottom) r R L' R' L f' L f L' r' exchanges front up left wedge with bottom right down wedge. Exchanging 2 wedges in picture up Turn the Rex Cube so as in picture down. Attachment:
Rexi.jpg [ 48.51 KiB  Viewed 7380 times ]
Then r R L' R' L f' L f L' r' In this way the whole wedges are solveable.


Top 


Swami

Post subject: Re: Rex cube solution Posted: Tue Oct 11, 2011 6:14 pm 

Joined: Sun Jan 24, 2010 3:16 pm

Using the algorithms provided by Roger I'm able to get the Rex Cube into a state where I only have the centres to solve. All my edges and corners are completely colved, but the centre pieces are scrambled. Does anyone know a simple method to get JUST the centres to move?


Top 


CrazyBadCuber

Post subject: Re: Rex cube solution Posted: Mon Dec 19, 2011 5:04 am 



Top 


heiowge

Post subject: Re: Rex cube solution Posted: Mon Dec 19, 2011 5:25 pm 

Joined: Tue Jan 13, 2009 8:23 pm

I recommend CrazyBadCuber's tutorial. I watched it this morning and have since solved it 3 times. This is a puzzle I haven't managed to solve completely since I got it a year back.
Thanks mate!
_________________ For Jasmine Rose... Happy 2nd Birthday in Heaven, 2nd Dec 2013 xxx


Top 


CrazyBadCuber

Post subject: Re: Rex cube solution Posted: Mon Dec 19, 2011 8:19 pm 


No problem. Thanks for the kind words =)


Top 


ft38

Post subject: Re: Rex cube solution Posted: Mon Dec 19, 2011 10:11 pm 

Joined: Wed Aug 11, 2010 7:28 pm

CrazyBadCuber wrote: I have made a very detailed tutorial on how I solve the rex cube using ONE algorithm. I too use his method and it is so simple and intuitive. You do not have to learn any ninja type algorithms. He has a great YouTube channel, so I would advise everyone to check it out.


Top 


MikonJuice

Post subject: Re: Rex cube solution Posted: Thu Jan 19, 2012 7:27 pm 

Joined: Tue Oct 19, 2010 5:16 pm

Just a little help here: I used roger's solution to almost complete the master skewb, but can't figure out a way to solve the tips. Can someone shed me some light?


Top 


Jack Lopez

Post subject: Re: Rex cube solution Posted: Thu Jan 19, 2012 7:48 pm 

Joined: Sun Feb 13, 2011 9:16 am Location: Indiana

ft38 wrote: CrazyBadCuber wrote: I have made a very detailed tutorial on how I solve the rex cube using ONE algorithm. I too use his method and it is so simple and intuitive. You do not have to learn any ninja type algorithms. He has a great YouTube channel, so I would advise everyone to check it out. Could not agree more with everything you said there. Great tutorial. Once I had the flipping down I was off on my own working on it. Great method. Jack
_________________ Jack Lopez


Top 



Page 1 of 1

[ 27 posts ] 

Who is online 
Users browsing this forum: MSNbot Media and 4 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


