Online since 2002. Over 3300 puzzles, 2600 worldwide members, and 270,000 messages.

TwistyPuzzles.com Forum

It is currently Fri Apr 18, 2014 9:42 pm

All times are UTC - 5 hours



Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Design challenge: Nightmare 3x3x3
PostPosted: Sun Jun 24, 2012 4:37 am 
Offline
User avatar

Joined: Mon Nov 30, 2009 1:03 pm
Hi Twisty Puzzles designers,

Here is a challenge: design a good Nightmare 3x3x3.

You may know the Nightmare Cube by Adam Cowan and Noah. This is a 2x2x2, based on a bandaged 3x3x3 inside. The bandaging was chosen such that
    1) When solved, all 2x2x2 turns are possible.
    2) The internal middle 3x3x3 layer can never move freely.
The first point enhances the surprise: it turns like a normal 2x2x2 at start. The second point assures that the puzzle never locks up internally.

One approach to design a Nightmare 3x3x3 would be to bandage an internal 5x5x5, and extend the central centers, middle edges and corners to the outside 3x3x3. However, you might find a better approach. Here are some criteria what may constitute a good Nightmare 3x3x3 design (assuming a 5x5x5 core).
    a) When solved, all 3x3x3 turns are possible.
    b) The internal 5x5x5 layers no.2 and no.4 can never move freely.
    c) The bandaging is non-trivial. It should be a true Nightmare puzzle.
    d) The bandaging is minimalistic, no more bandaging that essentially needed.
    e) The bandaging is elegant. E.g. as many different pieces as possible, or as many the identical pieces as possible, or a subtle broken symmetry, or [fill in your own criterion].

Here is a graphic representation of a 5x5x5, with circles indicating the 3x3x3. You may use it to sketch your proposed bandaging.
Attachment:
Nightmare 3x3x3 - view 1.jpg
Nightmare 3x3x3 - view 1.jpg [ 37.05 KiB | Viewed 883 times ]

Here is a filled-in example. I shall leave it to you to verify which of the above criteria it violates. But your entry may look similar to this (and hopefully better).
Attachment:
Nightmare 3x3x3 - view 2.jpg
Nightmare 3x3x3 - view 2.jpg [ 40.88 KiB | Viewed 883 times ]


An entry, posted in this thread, only qualifies if it includes evidence (e.g. analyses or arguments) that it satisfies the criteria. Criteria a), b) and c) are essential. Criteria d) and e) are qualitative, but should be as good as you can design them.

If there is an entry that I like enough, then I will make a prototype of it, crediting the winning designer.

I shall be looking forward to your designs and analyses!

Happy puzzling.

Oskar

_________________
Oskar's home page, YouTube, Shapeways Shop, Puzzlemaster, and fan club
Image.


Top
 Profile  
 
 Post subject: Re: Design challenge: Nightmare 3x3x3
PostPosted: Sun Jun 24, 2012 6:12 am 
Offline
User avatar

Joined: Sat Jan 16, 2010 11:48 am
Location: In Front Of My Teraminx (saying WTF?)
I don't plan on making this but just a question:

Do slice turns sometimes have to be blocked as well ? Because you could always design it as a nightmare 2x2 and then go for rails on top for the middle layer like the mixup cube...

EDIT: yes slce turns have to be blocked, so you could always add a rail / hook system from cetners to center-edges

_________________
My Shapeways Shop!
My Designs
My Official Results
My Website on Twisty Puzzles with Gears

Grégoire Pfennig


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Forum powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group