View unanswered posts  View active topics

Page 1 of 1

[ 13 posts ] 

Author 
Message 
themathkid

Post subject: Looking for challenging / non"standard" solves Posted: Wed Mar 26, 2014 11:13 pm 

Joined: Sat Sep 15, 2012 7:42 am

Hi all. I'm in need of a good challenge. I'm bored and I've solved most of my collection. I have some puzzles on the way, but I don't expect them to be too difficult [mostly sticker mods]. I'm not too keen on solving simulatoronly puzzles, either. I've been on a bandaged kick lately, but I'm growing tired of that. Of course, I always have Burgo's CrazyB4 kit. But right now I'm looking for something...different. A few weeks ago, I heard mention of the parityfree 4x4x4 and 6x6x6 solves. I loved these [I love all Chimeralike solves]. This is the kind of experience I'm looking for: solving existing puzzles in my collection in new and interesting ways. I've already seen a recent thread on scrambling and solving large cubes in a unique way [ link]. I've also seen Katten mention a centerslast solve for large cubes. Can anyone recommend some more challenges? Weird reductions? Bizarre solve orders? Limited movesets? Sliceonly solves? It doesn't have to be a cube. I am open to all suggestions [even bandaging, I suppose], though I can't guarantee I can complete them all!
_________________ Call me Seth
Crazy2Face & Crazy3Face Puzzle Spreadsheet Named 3x3x3 Bandaging Patterns


Top 


rplass

Post subject: Re: Looking for challenging / non"standard" solves Posted: Wed Mar 26, 2014 11:23 pm 

Joined: Thu Mar 28, 2013 7:14 pm

Ok one thing I've been working on is a bandaged gigaminx solve. It's been killing me. I mentioned a similar kind of solve in this thread: viewtopic.php?p=299400#p299400Now instead of forming the last ten blocks (five corner blocks and five edge blocks) as described in the last post of that thread ( viewtopic.php?p=301946#p301946 ), I've been trying to form the last ten blocks with the rest of the puzzle bandaged into corner blocks and edge blocks, which prevent me from using the threecycles moves mentioned in that last post. With U as a face containing all ten final blocks, the only moves available to me are U, U', u, u' and megaminx moves. Have not been able to do it, except I was able to get three full corner blocks solved fairly easily. Try that as a nonstandard solve!


Top 


benpuzzles

Post subject: Re: Looking for challenging / non"standard" solves Posted: Wed Mar 26, 2014 11:24 pm 

Joined: Fri Dec 28, 2012 1:50 pm Location: Near Las Vegas, NV

How about solving a 7x7 blindfolded with one foot? Ok more seriously...how about solving a Megaminx corners first, and then solving edges? Seems like it would be very tedious. EDIT: AHA! Try reducing a puzzle to a bandaged variant of that puzzle, and solving that bandaged variant. Good luck...
_________________ My Youtube channel My Shapeways Shop


Top 


themathkid

Post subject: Re: Looking for challenging / non"standard" solves Posted: Wed Mar 26, 2014 11:45 pm 

Joined: Sat Sep 15, 2012 7:42 am

rplass wrote: Ok one thing I've been working on is a bandaged gigaminx solve I don't see that being any different than the AI Cube / parityfree 4x4x4 solve. The edges would reduce like in the Corner Block 5x5x5 / parityfree 6x6x6 solve / Chimera 2x2 + 6x6. I've done all these in addition to the Camouflage Cubes series and the Chimera Shift 5x5x5, so I've pretty well refined my techniques for building the all the 2x2x2 corner blocks. These are all "Chimeralike" solves that I mentioned in the first post. benpuzzles wrote: How about solving a Megaminx corners first, and then solving edges? Seems like it would be very tedious. It would just be endless EPS. Good lord. Thanks but no thanks! benpuzzles wrote: EDIT: AHA! Try reducing a puzzle to a bandaged variant of that puzzle, and solving that bandaged variant. Good luck... Reduction to Bicube, anyone? Imagine the frustration of getting a "two swapped bars" reduction parity at the end. What a nightmare! I love it!
_________________ Call me Seth
Crazy2Face & Crazy3Face Puzzle Spreadsheet Named 3x3x3 Bandaging Patterns


Top 


Burgo

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 12:13 am 

Joined: Tue Feb 08, 2011 3:17 am Location: Australia

benpuzzles wrote: Imagine the frustration of getting a "two swapped bars" reduction parity at the end. What a nightmare! Actually Seth, interestingly that is what can literally happen with the Nightmare Cube, I've had that exact situation!
_________________ 1st 3x3 solve Oct 2010 (Even though I lived through the 80s). PB 3x3 55sec Jan 2011 (When I was a kid 1:30 was speedcubing so I'm stoked). 1st 3x3 Earth (nemesis) solve Jan 2011 My You Tube (Now has ALLCrazy 3X3 Planets with Reduction)


Top 


grigr

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 12:17 am 

Joined: Mon Jun 30, 2008 8:38 pm Location: Russia

_________________ my Shop: ShapeWays, grigorusha Big Puzzle Sale: EBay
Last edited by grigr on Thu Mar 27, 2014 12:21 am, edited 3 times in total.


Top 


rplass

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 12:19 am 

Joined: Thu Mar 28, 2013 7:14 pm

themathkid wrote: I don't see that being any different than the AI Cube / parityfree 4x4x4 solve. The edges would reduce like in the Corner Block 5x5x5 / parityfree 6x6x6 solve / Chimera 2x2 + 6x6. I've done all these in addition to the Camouflage Cubes series and the Chimera Shift 5x5x5, so I've pretty well refined my techniques for building the all the 2x2x2 corner blocks. These are all "Chimeralike" solves that I mentioned in the first post. OK it's different because there are edge blocks to solve, not just corner blocks. Also some techniques you use for the parity free 4x4x4 solve might not work on the gigaminx. If you typically perform a swap of two corners with each other, how would that be done on a gigaminx? That kind of thing. Try doing it. I'm having trouble with it so any insights would be helpful. OK another kind of unusual solve is the Cage Method for big cubes. Solve the edges and corners first, then solve the centers last. It's a 2 out of 10 for difficulty but it's interesting to find ways to efficiently swap the center pieces with each other using various commutators, 3cycles, setup moves, etc.


Top 


darryl

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 3:52 pm 

Joined: Fri Feb 18, 2000 8:50 am Location: chicago, IL area U.S.A

How about trying a bump cube or Braille cube with your eyes closed? It would certainly be a different type of challenge.
d


Top 


benpuzzles

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 3:56 pm 

Joined: Fri Dec 28, 2012 1:50 pm Location: Near Las Vegas, NV

darryl wrote: How about trying a bump cube or Braille cube with your eyes closed? It would certainly be a different type of challenge.
d I've done this with a Bump cube several times, and after practice it isn't that hard, but just time consuming.
_________________ My Youtube channel My Shapeways Shop


Top 


themathkid

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 10:44 pm 

Joined: Sat Sep 15, 2012 7:42 am

grigr wrote: http://oliverstickers.com/normalstickers/nxnxn/bandagedcubes http://oliverstickers.com/normalsticke ... ecahedronsOh wow! I actually just bought a Pyraminx Crystal and 5x5x5 to make the Brilminx and Chimera Shift. Now I don't have to make my own stickers. Awesome! Thanks, Grigr! rplass wrote: OK it's different because there are edge blocks to solve, not just corner blocks. Also some techniques you use for the parity free 4x4x4 solve might not work on the gigaminx. If you typically perform a swap of two corners with each other, how would that be done on a gigaminx? That kind of thing.
Try doing it. I'm having trouble with it so any insights would be helpful. I played around with this briefly today. It's exactly the same as a Corner Block 5x5x5 solve. Reducing the Gigaminx edges to Megaminx edges is exactly the same as reducing the 5x5x5 edges to 3x3x3 edges. Each consists of one outer edge with two adjacent "center edges." Similarly, the corners are all 7piece blocks consisting of 1 corner, 3 edges, and three "center corners." The only issue I can see is having to swap the "top" 2x2x1 sections of corner block, which is essential to finishing the AI Cube. It should be similar, but I'm just having trouble visualizing how to execute it. Not much of a problem, I'm sure. To swap two corners, try U'R'U L U'RU RL' FR'F' [all are doublelayer turns]. This will swap the two corners on the UL edge [without affecting orientation], but disturbs things on the R face [which we don't care about during the blockbuilding phase anyways]. This and corner orienting techniques should be sufficient to translate all the AI Cube / parityfree 4x4x4 techniques to the Gigaminx. The edges can be handled after all corner blocks are built. You will need to find sequences that permute edges without disturbing corners. Off the top of my head, this seems a bit more complicated than with a cube, but not much more. For example, U' [F'UFU']x2 U moves one edge off the L face without disturbing the L face corners [it actually cycles ULRFUF]. Corner orientations are disturbed, though, so you would need to fix that afterwards with something like [U'RUR']x2 L [U'RUR']x2 L' [again, these are all doublelayer turns]. Using these, the idea would be as follows: 1. Use a singlelayer turn to create an [edge + centeredge] pair at the UL edge. 2. Use the sequences listed above to cycle UL off the L face and bring in UF 3. Undo the singlelayer turn to restore the corner blocks and some of the Lface edges Since the corner blocks are fixed after each iteration, we really have a lot of freedom here. We can disturb the corners all we want. All that matters are the edges. By smartly placing bad edges at UL and UF, you can create 2 pairs at a time to quickly reduce the edges. Once all edges are reduced, solve as a Megaminx using only doublelayer turns.
_________________ Call me Seth
Crazy2Face & Crazy3Face Puzzle Spreadsheet Named 3x3x3 Bandaging Patterns


Top 


grigr

Post subject: Re: Looking for challenging / non"standard" solves Posted: Thu Mar 27, 2014 11:46 pm 

Joined: Mon Jun 30, 2008 8:38 pm Location: Russia


Top 


themathkid

Post subject: Re: Looking for challenging / non"standard" solves Posted: Fri Mar 28, 2014 8:52 am 

Joined: Sat Sep 15, 2012 7:42 am

Burgo wrote: themathkid wrote: Imagine the frustration of getting a "two swapped bars" reduction parity at the end. What a nightmare! Actually Seth, interestingly that is what can literally happen with the Nightmare Cube, I've had that exact situation! How can this be possible??? Hmmm. Now I must try this! I've noticed someone posted free STL files for a Nightmare Cube. In my recent thread, I mentioned that I have access to free 3D printing at the moment. I think this just moved to the top of my priorities list...
_________________ Call me Seth
Crazy2Face & Crazy3Face Puzzle Spreadsheet Named 3x3x3 Bandaging Patterns


Top 


rplass

Post subject: Re: Looking for challenging / non"standard" solves Posted: Fri Mar 28, 2014 1:56 pm 

Joined: Thu Mar 28, 2013 7:14 pm

Hi I tried the edge forming method you described. I ought to have mentioned that all the corner and edge blocks are bandaged except for U and u. The 3cycle of edges you mentioned worked, but brings the RF edge into the U face; but the RF edge is bandaged, so one cannot make a single slice turn through it.
I tried a 3cycle of edge blocks in U that goes UR to UF to UL and I can orient any edge block in U so Ill keep trying. It seems that one has to set up 5 center edges at a time, then u , then flip over each edge to put the single edge/center edge pair on U, and line up the next 5 center edges at a time.


Top 



Page 1 of 1

[ 13 posts ] 

Who is online 
Users browsing this forum: Google [Bot] and 7 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


