View unanswered posts  View active topics

Page 1 of 1

[ 23 posts ] 

Author 
Message 
cubeguy314

Post subject: Face turning octahedron solution Posted: Sat Aug 07, 2010 7:07 am 

Joined: Sat Jun 26, 2010 12:06 pm

Recently I received my Face turning octahedron. I have tried to solve it myself but I can't seem to figure it out. Please post your solutions. Thanks
_________________ ~cubeguy314~


Top 


WilliamF

Post subject: Re: Face turning octahedron solution Posted: Sat Aug 07, 2010 7:30 am 

Joined: Fri May 15, 2009 3:12 pm


Top 


cubeguy314

Post subject: Re: Face turning octahedron solution Posted: Sat Aug 07, 2010 8:02 am 

Joined: Sat Jun 26, 2010 12:06 pm

It's great! Thanks!
_________________ ~cubeguy314~


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Sat Jul 23, 2011 7:43 pm 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

Hello,
the solution from the link from William works. I used it. But it uses many many commutators. For this solution you must spent much time. Solution from that link:
1) Solve the corners intuitive 2) Flip 2 corners with R L' R' L 3) solve the centers with commutator 4) solve the edges with commutator
the commutator is: ( R U R' U ) x 2
This makes a 3 cycle of 3 centers AND a 3cycle of 3 edges on one face. After solving the centers you can only permute edges on 1 face, because the centers permute too.
Perhaps someone can post better algorithm. Perhaps it's effective to solve corners at last. Bu I don't find cornerpermutations that don't destroy centers and edges.
Cheers, Andrea


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Sun Jul 24, 2011 7:59 am 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

The solution from Jaap solves first the edges like a Dino Cube then the corners. At last the centers. The sequence ( r U r' U' ) x 5 solves the centers. There are 24 centers. Assume that 4 centers are solved automaticaly we need 400 moves to solve the centers.


Top 


Brandon Enright

Post subject: Re: Face turning octahedron solution Posted: Sun Jul 24, 2011 11:21 am 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

You can solve the centers pure with a [[1:1],1] commutated conjugate (8 moves).
Here you go in Gelatinbrain notation:
[ULB, URF, ULB'], URF&2, [ULB, URF', ULB'], URF'&2
There are a couple minor variations on the above concept that will cycle different pieces. Combined with setup moves you should be able to solve at least two, often three triangles at a time.
Supposing you average 2 setup moves to solve 3 triangles at a time then you can solve them all in 96 moves.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 1:44 am 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

Hello bmenrigh, I don't know this notation. ( Gelatinbrain notation ?) In a video I saw an other sequence. That's shorter. r' F' U F U' r U F' U' F Notation like Jaap's website. Code: U LB RB F L R D
If it's possible in easy way permute 3 centers then it uses 24/3 * ( 2+10+2) = 112 I think it's not possible permute every 3 centers with 2 setup moves. But I am not sure. 3 setupmoves is to much. You must memorize 12 setup moves for each 3 cycle. One mistake and you must begin from start. I like more easy solutions. Cheers, Andrea


Top 


Konrad

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 5:21 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 6:33 am 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

Hello Konrad, Quote: bmenrigh's [3,1] commutator is just 8 moves. Your algorithm is 10. I prefer easy sequences. They are easy to memorize. 1 or 2 moves more, no problem. the first link doesn't work. It shows a white screen. The program gelatinbrain, I found a zip file. This program doesn't show notation input. The program has not a inputfield for notation. The only input interface is the mouse. To find out moves for real puzzles it's better to do the input with notation and copy and paste. My self coded simulator for crazycubes was very simple (no animation) and accept only notation input. I had not found an explanation for the notation. I hope, that I must not read the complete gelatinbrain thread.


Top 


Brandon Enright

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 8:47 am 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

Hi Andrea,
Without the ability to copyandpast the notation into Gelatinbrain's applet I agree the notation isn't as useful.
I did decompose the sequence into its constituent building blocks: [[1:1],1]
If you are not familiar with that notation, the : and , operators are conjugation and commutation respectively.
So X:Y expands to X Y X' And X,Y expands to X Y X' Y'
[] are just for grouping so that you can nest.
Using those rules you can see that [[A:B],C] expands to A B A' C A B' A' C'
The numbers in the notation refer to the length of the operand sequences. [1,1] means you are building a 4 move sequence out of two 1 move sequences.
I could have also notated the sequence as [3,1] but using [1:1] in place of the 3 is a good way of saying the 3 moves are actually composed of 2 face turns of the form X Y X'
The sequence you posted is [1,[1,1]] or [1,4] which is just the inverse of a [4,1].
As you can see, the only difference between the sequence I created and the one you posted is that instead of commutating a [1,1] I used a [1:1] which is a careful observation that X:Y is a truncation of X,Y.
That is, X:Y is X Y X' and X,Y is X,Y,X',Y' which includes an unnecessary Y'. If you leave off a onemove Y' you save two moves because the move is used in a conjugation operation which means it will get applied once as Y' and another time as Y, saving 2 moves overall.
Regarding memorization, I think of a [[1:1],1] sequence as needing to memorize 3 moves and how they are put together (the operators) rather than having to memorize 8 moves. Your [1,[1,1]] is basically the same amount of memorization (three moves put together in a different way).
Regarding setup moves, the triangles in a FTO are in two orbits. Usually orbits reduce the number of setup moves because a piece that goes in a particular spot has fewer locations that it could be. You can solve by orbit ignoring the triangles in the other orbit. The 96 moves I suggested is really a worstcase upper bound. In reality you should be able to solve the entire puzzle in ~50 moves if you are very careful.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


Konrad

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 5:07 pm 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

Andrea wrote: Hello Konrad, Quote: bmenrigh's [3,1] commutator is just 8 moves. Your algorithm is 10. I prefer easy sequences. They are easy to memorize. 1 or 2 moves more, no problem. the first link doesn't work. It shows a white screen. The program gelatinbrain, I found a zip file. This program doesn't show notation input. The downloadable program has no cut and paste input. The online applet has. To give you another example of a (1,3) commutator that is very easy to memorize, I introduce first a very common notation: If the FTO is flat on a table with one tip pointing at you, R is a clockwise turn of he face to your right and r is an inner slice move of the layer below R. L is to your left. The sequence r (L R' L') r' (L R L') producces this result on a solved FTO: Mirrored and inverse sequences are easy to see. The (X,Y) notation would be (r,L R' L); X= r; Y = L R' L and that retranslates to X, Y,X',Y' = r (L R' L) r' (L R L') The construction logic helps to memorize this or similar samples quite easily. The right part of the diagram shows the unchanged other four faces. The diagram has been produced with the Gelatinbrain applet. The Gelatinbrain notation of the very same sequence is: UFL&2,UBR,UFL',UBR',UFL'&2,UBR,UFL,UBR', The &2 denotes an inner slice move under the face described by the first three letters. I have no idea why Gelatinbrain has chosen a three letter notation for a face turning puzzle. I would be glad myself, if somebody can explain the logic behind this. My theory is that it is using the three corners that are in a specific face. But why UFL stands for the right hand face, I have no idea. I had problems with the applet myself, there are dependencies on the browser, the operating system, the driver, whatever ... bmenrigh can give you certainly tips what to check. He has helped me some time ago, as well. Brandon, I hope you can explain the logic behind the Gelatinbrain notation. Andrea don't worry, for most Gelatinbrain puzzles the notation is easier. EDIT: @Andrea Andrea wrote: the commutator is: ( R U R' U ) x 2 This not a commutator! As bmenrigh has described it above, a commutator is described by two sequences X and Y and [X,Y] translates to X, Y, X', Y'. In R U R' U R U R' U you cannot identify X and Y.
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Mon Jul 25, 2011 7:44 pm 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

Hello Konrad, bmenrigh thanks for your explanation. The shown sequence is shorter as mine. If I must memorize more than 2 setup moves I make mistakes. So I must make more moves. Quote: This not a commutator! As bmenrigh has described it above, a commutator is described by two sequences X and Y and [X,Y] translates to X, Y, X', Y'. In R U R' U R U R' U you cannot identify X and Y. I thought that every sequence can be a commutator. Example A = R L U B = D2 L B A B' = D2L R L U L' D2 uses A as commutator I know it from mathematics. The form A B A' B' I know it as conjugate. I hope that's ok ? Perhaps I don't understand what's meant here. Sorry. Solving a puzzle and translate this "language / notation" is difficult. But to analyse a puzzle this is fine. Cheers, Andrea


Top 


Konrad

Post subject: Re: Face turning octahedron solution Posted: Tue Jul 26, 2011 3:19 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

Andrea wrote: ...I thought that every sequence can be a commutator. Any sequence of moves can be called a permutation. Conjugates and Commutators are defined specifically. Andrea wrote: Example A = R L U B = D2 L
B A B' = D2L R L U L' D2 uses A as commutator B A B' is a conjugation. Andrea wrote: I know it from mathematics.
The form A B A' B' I know it as conjugate. Actually, this is a commutator. Conjugation (or conjugacy) is defined e.g. here. bmenrigh describes the terms correctly, maybe a bit short for somebody who is not so familiar with them. bmenrigh wrote: ... If you are not familiar with that notation, the : and , operators are conjugation and commutation respectively.
So X:Y expands to X Y X' X:Y is just a notation describing "conjugation". X:Y := X Y X'. If you have algorithm Y, X is your setup sequence! bmenrigh wrote: And X,Y expands to X Y X' Y' Again just a short cut for "commutators". by Ryan Heisebmenrigh wrote: [] are just for grouping so that you can nest.
A good site describing the stuff related to the Rubik's Cube is Ryan Heise's siteYou do not need it solving a puzzle but the stuff is useful understandig algorithms, finding new ones and memorizing them. E.g. you can solve a Rubik's Cube without memorizing any algorithms, if you understand the concepts of conjugation and commutation, thoroughly. Not an easy way I hope this helps
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


Andrea

Post subject: Re: Face turning octahedron solution Posted: Tue Jul 26, 2011 5:17 am 

Joined: Wed Apr 13, 2011 8:37 am Location: Germany

Hello Konrad,
oh, I exchanged commutator and conjugate. Thanks for explaining it. I know both, but my definition was vice versa. Yes, its possible to solve the Rubiks Cube without memorize algorithm. The Ryan Heise method can be modifyed. Building blocks like petrus method. Then solve edges with keyhole technique. Then permute corners with "conjugators" and orient corners with "conjugators". Very interesting. Sorry that I exchanged the names of concepts.
Cheers, Andrea


Top 


Konrad

Post subject: Re: Face turning octahedron solution Posted: Tue Jul 26, 2011 7:46 am 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

Andrea wrote: Hello Konrad,
oh, I exchanged commutator and conjugate. Thanks for explaining it. ... Aaah, I see, you are familiar with the concepts, you have just mixed up the terms. Don't worry
_________________ My collection at: http://sites.google.com/site/twistykon/home


Top 


Brandon Enright

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 10:16 am 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

Konrad wrote: The (X,Y) notation would be (r,L R' L); X= r; Y = L R' L and that retranslates to X, Y,X',Y' = r (L R' L) r' (L R L') The construction logic helps to memorize this or similar samples quite easily.
The right part of the diagram shows the unchanged other four faces. The diagram has been produced with the Gelatinbrain applet. The Gelatinbrain notation of the very same sequence is: UFL&2,UBR,UFL',UBR',UFL'&2,UBR,UFL,UBR', The &2 denotes an inner slice move under the face described by the first three letters. I have no idea why Gelatinbrain has chosen a three letter notation for a face turning puzzle. I would be glad myself, if somebody can explain the logic behind this. My theory is that it is using the three corners that are in a specific face. But why UFL stands for the right hand face, I have no idea. [...] Brandon, I hope you can explain the logic behind the Gelatinbrain notation. Andrea don't worry, for most Gelatinbrain puzzles the notation is easier. The Gelatinbrain notation makes a lot of sense when you break it down. It isn't always convenient to read and write manually but if you have the Jar working it doesn't matter. Gelatinbrain's notation is based on the faceturning tetrahedra / cubes / dodecahedra. The other platonic solids are the duals of these three and their notation is based off of their faceturning dual counterpart. So for the FTO, the faceturning is equivalent to vertex turning on a cube and the vertices of the cube are labeled by the three faces that intersect at that vertex. So faceturning dodecahedra and vertex turning icosahedra share the same notation. Vertex turning dodecahedra and face turning icosahedra share the same notation and so forth. The only "strange" notation is the tetrahedra because they are selfdual. If you turn a vertex you get vertex notation and if you turn a face you get face notation. The other tricky part is slices and turning a face more than a "quarter" turn. Slices are a bitmask where the face is the 1 bit, the second slice is the 2 bit, and if there is a deeper slice it is the 4 bit. So if you want to turn a face you could specify A or A&1. If you want to turn just the slice then you can do A&2. If you want to turn both you can do A&3. Inverse turns look like A', A'&2, etc. Turning a face twice looks like A2, A'2, etc. Finally, you can turn a slice twice too with A2&2, A'2&2, etc. I like Gelatinbrain's notation because it is complete and unambiguous and there is a program you can copy and paste into. If you specify routines in a different notation you have to use a physical puzzle or translate which is errorprone.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


Konrad

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 2:40 pm 

Joined: Thu Sep 17, 2009 6:07 am Location: Germany, Bavaria

bmenrigh wrote: ...Gelatinbrain's notation is based on the faceturning tetrahedra / cubes / dodecahedra. The other platonic solids are the duals of these three and their notation is based off of their faceturning dual counterpart. So for the FTO, the faceturning is equivalent to vertex turning on a cube and the vertices of the cube are labeled by the three faces that intersect at that vertex. ... Thanks Brandon for your explanation. Still I'm missing something. I understand the part that the Octahedron is dual to the Hexahedron (Cube). I understand that the face turns are named as the corresponding cube vertexes. Still I do not see the logic behind using R = Right L = Left F = Front and B = Back in the Gelatinbrain notation. This is the Gelatinbrain notation for the FTO: I have no intuitive way to understand why UFL is at my righthand side and ULB is at the front to me.
_________________ My collection at: http://sites.google.com/site/twistykon/home
Last edited by Konrad on Thu Jul 28, 2011 1:05 pm, edited 1 time in total.


Top 


schuma

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 3:45 pm 

Joined: Thu Jul 23, 2009 5:06 pm Location: Berkeley, CA, USA

Konrad wrote: I have no intuitive way to understand why UFL is at my righthand side and ULB is at the front to me. I guess you have to imagine yourself standing at the top right corner of the left view. Maybe Gelatinbrain uses this weird POV because the code is more compatible with that for the cube. Like, in Gelatinbrain's cube, the F face is not directly in front, but in the left bottom corner of the left view, and the URF corner is in the center. Maybe the convention for the octahedron has something to do with that.


Top 


Brandon Enright

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 4:39 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

Yeah it's a bit odd but I think the strange locations for the vertex labels are an artifact of the view snapping for the octahedra. With the octahedra you can only view the shape with a vertex pointing straight out at you. It would make sense to make the vertex pointing at you the U face and then it's really a random choice if you choose the upper right or lower right vertex as the F face. Here are the vertex labels: Attachment:
gb_octahedra_notation.png [ 11.71 KiB  Viewed 3114 times ]
It doesn't seem like there are any natural views of an octahedron that are also natural views for the cube. I think the choice of labels that Gelatinbrain made are just as good the few other obvious choices.
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


gelatinbrain

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 4:57 pm 

Joined: Thu May 31, 2007 7:13 pm Location: Bruxelles, Belgium

bmenrigh wrote: Yeah it's a bit odd but I think the strange locations for the vertex labels and an artifact of the view snapping for the octahedra. With the octahedra you can only view the shape with a vertex pointing straight out at you. It would make sense to make the vertex pointing at you the U face and then it's really a random choice if you choose the upper right or lower right vertex as the F face. Here are the vertex labels: Attachment: gb_octahedra_notation.png It doesn't seem like there are any natural views of an octahedron that are also natural views for the cube. I think the choice of labels that Gelatinbrain made are just as good the few other obvious choices. This choice is arbitrary. I had to choose. That's all. With my fixed orientation, there's no way to keep the LR symmetry. If one of 3 pairs of opposite corners(UD,LR,FB) is brought to center(UD, in this case), other 2 pairs comme to diagonals. The most intuitive notation will be like this: Code: U U   LFR RBL   D D
But to realize this, I have to rotate the entire puzzle by 45ยบ. Or maybe I should at least bring the FB pair to center. It's more intuitive. If it's confusing at the first time, you can be easily accustomed. Just like in the universe, there's no fixed axis on a twistypuzzle. You are right, Conrad! Einstein must love twistypuzzles, if he were still living today.
_________________ Virtual Magic Polyhedra Applet(Online) Executable Jar Installer Win32 Executable(Download) troubleshooting


Top 


schuma

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 5:00 pm 

Joined: Thu Jul 23, 2009 5:06 pm Location: Berkeley, CA, USA

I think given the notations for the cube, a natural notations for the octahedron should be as follows: Attachment:
cube.PNG [ 16.87 KiB  Viewed 3102 times ]
But I don't mind the current notation, because when I'm looking for algorithms, I twist the puzzle by clicking the mouse and then copy/paste the list of the moves. I never have to think which face is called what. Sometimes I need to "mirror" an algorithm. When I do that I just swap F<>R, B<>L, clockwise <> counterclockwise. This rule works for both the cube and the octahedron.


Top 


Brandon Enright

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 5:21 pm 

Joined: Thu Dec 31, 2009 8:54 pm Location: Bay Area, California

schuma wrote: But I don't mind the current notation, because when I'm looking for algorithms, I twist the puzzle by clicking the mouse and then copy/paste the list of the moves. I never have to think which face is called what.
Sometimes I need to "mirror" an algorithm. When I do that I just swap F<>R, B<>L, clockwise <> counterclockwise. This rule works for both the cube and the octahedron. Yeah the current labels don't bother me either. I never have to think about the labels. Regarding mirroring and inverting, etc, I have a series of perl scripts to help me: Code: gb_dodeca_rotate.pl gb_dodeca_sequences.pl gb_invert.pl gb_mirror_cube.pl gb_mirror_dodeca.pl gb_pretty.pl gb_update_check.pl
I have been planning on creating a simple web interface to these tools for people who want to mirror/rotate/invert/whatever the macros/notation. Nan, when you're solving a puzzle with macros, do you premake the sequence, its inverse, its mirror, and its mirrored inverse? I only make the sequence and the inverse and sometimes I have to spend a bunch of time doing setup moves to make the sequence I need fit. Do you create a bunch of variants for each macro sequence? I recently solved 1.2.28 and 1.2.29 and they took me ~50 minutes with macros and they only took you ~13 minutes. The majority of my time was with finding setup moves to cycle the center triangles. I was pretty amazed how much faster you were than me. I wasn't trying to be efficient. Did you have a lot more macro variants made for the triangles cycle?
_________________ Prior to using my real name I posted under the account named bmenrigh.


Top 


schuma

Post subject: Re: Face turning octahedron solution Posted: Wed Jul 27, 2011 6:23 pm 

Joined: Thu Jul 23, 2009 5:06 pm Location: Berkeley, CA, USA


Top 



Page 1 of 1

[ 23 posts ] 

Who is online 
Users browsing this forum: Google Adsense [Bot] and 5 guests 

You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum


