Post pictures of any completed new puzzles here: sticker variations, simple mods, complex customs, brand new inventions and newly released production puzzles.
Author |
Message |
gingervergo
|
Post subject: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Thu Feb 10, 2011 7:18 pm
|
|
Joined: Fri Mar 06, 2009 9:23 pm
|
Hey forum, here is my version of the royal skewb. It is cubic, with non proportional cuts, and it has an edge length of 57mm, meaning it is the size of a normal 3x3. I wanted to test a new type of mechanism that had not been utilized in a higher order before, and this was the result. It passed the test well enough where I will scale it up to something truly insane in the future.
The turning is very good, but I'm not 100% happy with it, so I am going to do v2, and I will sell that one. It will have to be slightly larger, but i would say 65mm edge length is a good guess.
Stickering this puzzle took almost 9 hours, because each tiny little sticker had to be individually separated, and super glued on. It was a painstaking process, and actually resulted in me having blurry vision at the end. Stickers were cut by Eitan.
Video
Last edited by gingervergo on Fri Feb 11, 2011 12:41 pm, edited 2 times in total.
|
|
|
|
Top |
|
|
Mindstormscreator
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 7:23 pm
|
|
Joined: Wed Mar 11, 2009 3:33 pm
Website: http://www.youtube.com/Mindstormscreator
Yahoo Messenger: spunko@yahoo.com
Location: Pennsylvania, USA
|
I like the overall appearance of it, looks great!
_________________ NEEDS MORE LUBIX
My Youtube and Shapeways
|
|
Top |
|
|
Rob
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 7:31 pm
|
|
Joined: Mon Apr 03, 2006 10:38 am
Website: http://robspuzzlepage.com
Location: Connecticut
|
|
Top |
|
|
MonkeyZ
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 7:39 pm
|
|
Joined: Tue Aug 11, 2009 3:59 pm
Website: http://watersavers.webs.com
Location: NJ
|
This looks so cool. I love the deepness of each cut, even if it looks a bit thin.
_________________
Jhahoua wrote:Oskar wrote:There are three types of people: those are good at counting and those who aren't ...
But that is only 2 kinds of people what is the 3rd?
|
|
Top |
|
|
c1829
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:02 pm
|
|
Joined: Sat Mar 06, 2010 8:20 pm
|
Wow this is ridiculous. Great job.
_________________ -Jacob Hamrick
2x2 PB: 2.36
3x3 PB: 19.89
Tony Fisher wrote:MaCheezm0 wrote:2nd layer using Fisher parts
I very much hope you mean Fisher Cube parts.
|
|
Top |
|
|
Carter
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:03 pm
|
|
Joined: Sat Dec 02, 2000 8:27 pm
Website: http://home.ec.rr.com/specialpuzzles/Index.htm
Location: Wilmington, NC, USA
|
Awesome, gorgeous puzzle. I like the way you rounded the corners on the stickers. I can't image the tediousness of putting them on one-by-one, but the effort really paid off.
|
|
Top |
|
|
Monopoly
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:07 pm
|
|
Joined: Sun May 17, 2009 1:33 pm
Location: USA, North America, Planet Earth, Solar system, Milky Way galaxy, Universe
|
|
Top |
|
|
Superbud9123
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:12 pm
|
|
Joined: Thu Dec 30, 2010 12:32 am
Website: http://www.youtube.com/shanesdominoez
|
Holy Cow! That is insane!
LOL. Nice job. I didn't think that high of an order was possible. Amazing job.
|
|
Top |
|
|
quicksolver
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:19 pm
|
|
Joined: Fri Feb 20, 2009 6:38 pm
|
@Monopoly: There was a tetrahedral version of this made a while back by Drewseph (I believe).
Congratulations! I have been waiting for this since I first saw the tetrahedral version!
|
|
Top |
|
|
Kevin
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:26 pm
|
|
Joined: Fri Jan 14, 2011 5:16 pm
Location: Unknown
|
Dude! That is freaking awesome. I desperately wish that I could learn how to use a CAD program so that I could design these beasts. congrats on the new build.
|
|
Top |
|
|
mizzle576
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:30 pm
|
|
Joined: Tue Jul 13, 2010 11:39 pm
Location: USA Michigan
|
What a nice addition to your already stellar line of puzzles. Good job. I wish it were proportional though.
PS: I thought you didn't like higher order puzzles?
Chris
Last edited by mizzle576 on Fri Feb 11, 2011 9:42 am, edited 1 time in total.
|
|
|
|
Top |
|
|
mitchblahman
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:45 pm
|
|
Joined: Sat Aug 22, 2009 3:27 pm
Website: http://www.youtube.com/mitchblahman13
Location: California
|
oh my dear lord i appear to have wet myself
_________________ Wazzaaaaaa!
I'm a youtuber =D
hey look ^
Rest In Peace Frank
|
|
Top |
|
|
Adman234
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 8:49 pm
|
|
Joined: Tue Jul 27, 2010 10:17 am
Location: Missourica
|
VERY cool. You should also make some shapemods of it (Royal Skewb Ultimate)
Nice work, I feel your pain for the stickering!
_________________ Adam Brown, Puzzle Builder/Modder
Past project: Master Mental Block
Current Project: Getting through college
Oskar wrote:I am now adding dummy cubes to my models to cross the 10% density threshold and save myself money big time.
|
|
Top |
|
|
Kapusta
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 10:28 pm
|
|
Joined: Tue Mar 10, 2009 7:06 pm
Website: https://www.linkedin.com/in/wilmedeiros
Location: Nowhere in particular.
|
Beautiful puzzle, Eric. You must be spending out the wazoo lately.
_________________ ~Kapusta
PB: At home (In Competition)
2x2 1.xx (2.88)
3x3 11.xx (15.81)
4x4 52.xx (1:24.63)
5x5 2:25.xx (3:00.02)
6x6 4:26.05 (6:34.68)
7x7 5:54.xx (9:48.81)
OH (35.63)
Current Goals:
4x4 sub-1:00 Avg.
5x5 sub-2:00 Avg.
6x6 sub-4 Avg.
|
|
Top |
|
|
JeongEC
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 11:00 pm
|
|
Joined: Tue Oct 12, 2010 5:28 am
Location: Incheon, Korea
|
Another master puzzle !
Really really really amazing work!
I can't wait to see a video.
-JEC-
_________________ I love puzzle, of course magic cube too!
Sorry for my bad English!
|
|
Top |
|
|
Nestor
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Thu Feb 10, 2011 11:41 pm
|
|
Joined: Sun Aug 22, 2010 12:32 pm
|
I pity the one who sits to solve this :O
Amazing work .
|
|
Top |
|
|
traiphum
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 12:01 am
|
|
Joined: Mon Dec 08, 2008 10:48 pm
Location: Thailand
|
|
Top |
|
|
Luke
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 2:23 am
|
|
Joined: Thu Sep 24, 2009 12:21 pm
Location: Bristol, UK
|
|
Top |
|
|
Timur
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 3:09 am
|
|
Joined: Mon Mar 22, 2010 7:00 am
Location: Germany, Siegerland
|
Congratulations, that's great!
Last summer I designed a pillowed Royal Skewb for Cublem (Thang Nguen), but it seems like he never built it, so you're the first. Is your mech something like this?
- rs.jpg (23.58 KiB) Viewed 6974 times
|
|
Top |
|
|
Luke
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 3:15 am
|
|
Joined: Thu Sep 24, 2009 12:21 pm
Location: Bristol, UK
|
Well, it may be the first presented, but it may not necessarily be the first made... But it might be. It all depends on when Eric assembled the working puzzle.
_________________ 3x3x3 single: 5.50 seconds.
3x3x3 average of five: 7.70 seconds.
3x3x3 average of twelve: 9.72 seconds.
Buy the Curvy Copter Skewb, NovaMinx, and more here!
|
|
Top |
|
|
kastellorizo
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 9:44 am
|
|
Joined: Fri Nov 04, 2005 12:31 am
Website: http://www.houlis.com
Location: Greece, Australia, Thailand, India, Singapore.
YouTube: kastellorizo
|
|
Top |
|
|
APJ
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 11:30 am
|
|
Joined: Sat Jul 11, 2009 1:09 pm
Website: http://www.youtube.com/user/cubiksrube113
Location: My House
|
Some of those pieces are tiny, but I love this puzzle.
Alex
_________________ If I had £1,000,000 more, I'd be a Millionaire
YouTube Account: Cubiksrube113
|
|
Top |
|
|
merlintocs
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 11:34 am
|
|
Joined: Fri Dec 23, 2005 1:45 pm
Location: St. Louis, Missouri
|
|
Top |
|
|
Thomas
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 12:41 pm
|
|
Joined: Thu Aug 24, 2006 5:34 pm
Location: Rotterdam, Netherlands
|
|
Top |
|
|
Grégoire Pfennig
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 12:53 pm
|
|
Joined: Sat Jan 16, 2010 11:48 am
Location: Belfort, France
|
|
Top |
|
|
Tony Fisher
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 1:47 pm
|
|
Joined: Sun Mar 27, 2005 7:37 pm
Website: http://tonyfisherpuzzles.atwebpages.com/index.html
Location: A free independent country
Facebook: tony.fisher.509
Twitter: TonyFisherPuzls
YouTube: KaiXevandStanley
|
Love it. Especially it's unpillowedness.
_________________
|
|
Top |
|
|
alaskajoe
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 1:49 pm
|
|
Joined: Mon Feb 06, 2006 12:52 am
|
Oh, COME ON!!!
I just watched the vid and the turning is just unfair! Yeah, you heard me. UNFAIR. You must have cheatet somehow.
Why exactly are you not 100% percent happy with it? I suppose you are 120% percent happy with it but are a person so modest as to wish for a not so perfect puzzle....?
I think not only your sight became blurred during stickering. Also something happened to your nerves. They are overly sensitive at the moment because of all the irritation or something.
The puzzle is massively... perfect.
I want to place an audio file in this post. Some epic hero melody or so. So it always starts as soon as you klick on the topic.
like this one
http://www.youtube.com/watch?v=S0el6NYq ... playnext=1
is it allowed to post this?
_________________ Rings, Tie Bars and Cufflinks with engineering themes on my webpage Engineer's Jewelry or in my shapeways shop.
|
|
Top |
|
|
Leslie Le
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 2:44 pm
|
|
Joined: Sun Aug 09, 2009 1:46 pm
Location: P.R.China
|
I love its compactness, great job!
|
|
Top |
|
|
c1829
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 3:02 pm
|
|
Joined: Sat Mar 06, 2010 8:20 pm
|
The turning is amazing! Especially for something with layers that thin.
_________________ -Jacob Hamrick
2x2 PB: 2.36
3x3 PB: 19.89
Tony Fisher wrote:MaCheezm0 wrote:2nd layer using Fisher parts
I very much hope you mean Fisher Cube parts.
|
|
Top |
|
|
Derek Tolley
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 11, 2011 3:49 pm
|
|
Joined: Tue Feb 26, 2008 1:22 pm
|
Tony Fisher wrote:Love it. Especially it's unpillowedness.
Definitely.
Looks excellent, keep cranking them out!
|
|
Top |
|
|
Monopoly
|
Post subject: Re: Eric Vergo's Cubic Royal skewb
Post
Posted: Fri Feb 11, 2011 4:26 pm
|
|
Joined: Sun May 17, 2009 1:33 pm
Location: USA, North America, Planet Earth, Solar system, Milky Way galaxy, Universe
|
quicksolver wrote:@Monopoly: There was a tetrahedral version of this made a while back by Drewseph (I believe).
Congratulations! I have been waiting for this since I first saw the tetrahedral version!
Right, Drewseph's Royal Tetrahedron. Can't believe I forgot...
but now that you've reminded me that it existed, I have to say that when I first saw it I was wondering why a cubic (pillowed or not) version did not exist...
_________________ -sj
NEW VIDEOS-
3x3x3 stop-motion solve
Meffert's new Pyraminx Crystal solve
QJ 4x4x4 solve
|
|
Top |
|
|
Garrett
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Sat Feb 12, 2011 1:52 am
|
|
Joined: Wed Aug 01, 2007 3:14 pm
Location: Alameda, CA
|
|
Top |
|
|
Sigurd
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Sat Feb 12, 2011 4:16 am
|
|
Joined: Mon Aug 27, 2007 3:50 pm
Location: Copenhagen, Denmark
|
I personally think it looks very good and smooth! I cant wait tho to see version 2.
-Sigurd
_________________
Tony Fisher wrote: I believe it would work best with black plastic.
|
|
Top |
|
|
Grégoire Pfennig
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Sat Feb 12, 2011 6:58 am
|
|
Joined: Sat Jan 16, 2010 11:48 am
Location: Belfort, France
|
|
Top |
|
|
77mouser
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Fri Feb 25, 2011 4:25 pm
|
|
Joined: Mon Jun 14, 2010 6:59 pm
Location: Romeoville, IL
|
Will you be offering this on Shapeways?
|
|
Top |
|
|
gingervergo
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Sat Feb 26, 2011 1:20 pm
|
|
Joined: Fri Mar 06, 2009 9:23 pm
|
77mouser wrote:Will you be offering this on Shapeways?
No, this puzzle will not be available through shapeways. I neglected to mention during the auction that It is going to be a very limited item.
|
|
Top |
|
|
wwwmwww
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Sat Feb 26, 2011 3:42 pm
|
|
Joined: Thu Dec 02, 2004 12:09 pm
Website: http://www.wwwmwww.com/
Location: Queen Creek, AZ
|
gingervergo wrote:No, this puzzle will not be available through shapeways. I neglected to mention during the auction that It is going to be a very limited item.
Is that also going to be true of the version 2 you mention here?
gingervergo wrote:The turning is very good, but I'm not 100% happy with it, so I am going to do v2, and I will sell that one. It will have to be slightly larger, but i would say 65mm edge length is a good guess.
Is a version 2 still in the plans?
Carl
_________________ -
|
|
Top |
|
|
Drewseph
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Mon Feb 28, 2011 10:18 pm
|
|
Joined: Mon Feb 04, 2008 8:57 pm
|
whoa... um, what happend to my post? and several other replies?
|
|
Top |
|
|
c1829
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Mon Feb 28, 2011 10:23 pm
|
|
Joined: Sat Mar 06, 2010 8:20 pm
|
Drewseph wrote:whoa... um, what happend to my post? and several other replies?
Split to this thread here: http://twistypuzzles.com/forum/viewtopi ... =9&t=20585
_________________ -Jacob Hamrick
2x2 PB: 2.36
3x3 PB: 19.89
Tony Fisher wrote:MaCheezm0 wrote:2nd layer using Fisher parts
I very much hope you mean Fisher Cube parts.
|
|
Top |
|
|
pirsquared
|
Post subject: Re: Eric Vergo's Cubic Royal skewb (Video added)
Post
Posted: Mon Feb 28, 2011 10:23 pm
|
|
Joined: Wed Jan 07, 2009 6:46 pm
Website: http://www.eitancher.com
Location: Minneapolis, MN
|
|
Top |
|
|